The_Cat_the_Bird_and_the_Paper_Towel_1_711b5204c3_2 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_2_d464b10bb4_3 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_3_ba7576208d_4 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_4_1_17c286eb01_5 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_4_2_7b4318d815_6 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_5_fa5066b8d0_7 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_6_a144a3f692_8 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_7_2a1e8fdd93_9 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_8_ee8baa80c9_10 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_9_8fe68e2544_11 The Cat, the Bird and the Paper Towel
The_Cat_the_Bird_and_the_Paper_Towel_10_e574c229c2_1 The Cat, the Bird and the Paper Towel

https://romanscan.com/The_Cat,_the_Bird_and_the_Paper_Towel_Stl_File

3D MODEL DESCRIPTION
 

His only two hobbies are hunting birds and playing with your paper towel. Guess which one he likes best? This is a support free print, just be sure to mind your retraction levels for better finishing results. 
 

  • This STL file is recommended for FDM Printers!
  • 3D Printing Time: 20 Hours and 36 Minutes
  • Approximately Height :  24cm
     

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) 
  • Recommended Initial Layer Height:  0.16 mm
  • Recommended Layer Height:  0.16 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.