Buy me a coffee on Patreon: https://www.patreon.com/romanscan
Or
https://romanscan.com/Master_of_Arrows_Pen_Holder
The fiercest arrows on Earth hidden in his quiver ; a pencil holder that will make you shiver.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 01 Hour 29 Minutes
- Approximately Height: 15,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Bir yanıt yazın