Lion’s Courage Fountain Backflow Burner

3D MODEL DESCRIPTION
 

Many believe drinking from the fountain will grant you the courage of the lion, but in fact you already need to be brave in order to drink from it. 
 

(Disclaimer: this is a joke, do not attempt to drink any incense residue)
 

For the incense burner, We recommend place a larger washer (link below) in the top bowl. The washer must have a hole and some distance to the bottom so that the incense burner can release the smoke downwards into the bowl. 

***Please do not leave the object alone when the incense burner is lit.***

** SUGGESTION LINKS **

Ceramic Spacer/Washer 6.5x24x9 
 

ALIEXPRESS

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 17 Hour 13 Minutes (will vary accord to you printer model)
• Approximately Height: 17 cm 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.16 mm
• Recommended Layer Height:  0.16 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.