El_Pescador_Incense_Holder_1_8dda90c545-1 El Pescador Incense Holder
El_Pescador_Incense_Holder_2_6b5be902ca El Pescador Incense Holder
El_Pescador_Incense_Holder_3_20b6adaf41 El Pescador Incense Holder
El_Pescador_Incense_Holder_4_d77949c2f6 El Pescador Incense Holder
El_Pescador_Incense_Holder_5_e7412a71d3 El Pescador Incense Holder
El_Pescador_Incense_Holder_6_8c3517677d El Pescador Incense Holder

https://romanscan.com/El_Pescador_Incense_Holder

3D MODEL DESCRIPTION
 
This incense holder is definitely fishing for compliments 
 

  • This STL file is recommended for FDM Printers!
  • 3D Printing Time: 1 Day 23 Minutes
  • Approximately Width : 23 cm


     

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)  | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
  • Recommended Initial Layer Height:  0.16 mm
  • Recommended Layer Height:  0.16 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.