Hot_Spot_Headphone_Holder_1_26d14816b5-1_1-1 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_1_26d14816b5_2 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_1_Photoroom_5_306e46a87d_3 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_2_403bbefe58_4 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_3_75b1ae3358_5 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_4_b565247643_6 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_5_3af8bb851a_7 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_6_84a388eda4_8 Hot Spot Headphone Holder Stl File
Hot_Spot_Headphone_Holder_7_8226f0c212_9 Hot Spot Headphone Holder Stl File

https://romanscan.com/Hot_Spot_Headphone_Holder

3D MODEL DESCRIPTION
 
Don’t worry, despite looking dangerous, this headphone holder is perfectly safe… and cool. 

  • This STL file is recommended for FDM Printers!
  • 3D Printing Time Based on Ender 3: 2 Day 3 Hours 13 Minutes (will vary accord to you printer model)
  • Approximately Length: 20 cm
     
  • In order to assembly this print you will need the materials below: 

          LED Light  
          On-Off Switch
          LED Socket
          Soldering Iron 
          Electric Wire
          Electrical Plug (2.1mm DC Jack 12V)
          Power Supply (12V 1A)
          Electrical Tape
 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) 
  • Recommended Initial Layer Height:  0.20 mm
  • Recommended Layer Height:  0.20 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Top Layer: 7.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.